What does E stand for?

General: Units and dimensions, dimensional analysis; least count, significant figures; Methods of measurement and error analysis for physical quantities pertaining to the following experiments: Experiments based on using Vernier calipers and screw gauge (micrometer), Determination of g using simple pendulum, Young's modulus by Searle's method, Specific heat of a liquid using calorimeter, focal length of a concave mirror and a convex lens using u-v method, Speed of sound using resonance column, Verification of Ohm's law using voltmeter and ammeter, and specific resistance of the material of a wire using meter bridge and post office box.

This study reports the effects of saturation time (ST), saturation pressure (SP), and NaCl/polymer mass ratio (NaCl/PMR) on the scaffold density, porosity, average pore size, pore density (PD), and Young's modulus in compression using the biodegradable polymer 85/15 poly(DL-lactide-co-glycolide) acid.

3 The Density-Modulus Relationship and the Simulation of Anisotropy Various empirical models of the relationship between Young's modulus and the apparent bone density can be found in the literatures [7,8].

Unconfined compressive strength (UCS) decreases with decreasing loading rate while Young's modulus (E) increases non-linearly with increasing confining pressure.

The film has a Young's modulus in a longitudinal direction of 8 to 12 Gpa; a Young's modulus in a transverse direction of 6.

0] is Young's modulus at absolute zero, and b and [T.

Vicar softening temperature is 134 C and Young's modulus is 609,000 psi.

This same trend was repeated in Young's Modulus measurements (Fig.