According to the UNOS, all safety measures have been put in place in the container, which can handle maximum test pressure of 15,000 psi (pound per square inch) and sample flasks to a maximum test pressure of 24,000 psi.
What does TP stand for?
TP stands for Test Pressure
This definition appears frequently and is found in the following Acronym Finder categories:
- Science, medicine, engineering, etc.
See other definitions of TP
We have 84 other meanings of TP in our Acronym Attic
Samples in periodicals archive:
The test loop is constructed of standard wall piping with 1,345 psi working pressure and 2,017 psi test pressure.
The 2700G Series can be paired with the Fluke 700PTPK and 700HTPK Test Pressure Kits for a complete portable pressure testing solution, or with the Fluke Calibration P5500 Series Comparison Test Pumps for a comprehensive benchtop pressure calibration solution.
The hope is that we can slowly turn off the valves, close the capping completely and then test pressure to see how the well is performing," Allen said.
The Navy fire hose is rated to 300 psig test pressure and 600 psig burst pressure, failure modes could include hose wall burst, hose to fitting separation or end fitting (fitting with nozzle or cap) separation.
Volunteers staff the summer statewide and local food safety/storage/preservation hot lines, as well as teach classes, test pressure canner gauges and staff information booths at local fairs and events.
Dow says it also demonstrates excellent resistance to rapid crack propagation, with a critical temperature (Tc) below 0[degrees]C at 5 bar test pressure, as measured by the ISO 13477 Small Scale Steady State (S-4) Test.
While the crack propagates, internal disc baffles spaced along the pipe length suppress axial decompression ahead of it, so that the pressure at the crack-tip is approximately equal to the test pressure during the entire course of crack growth.