insulation on high pressure steam valves Cooling water: - Approximately 590 m insulation on cooling water pipe DN 15 to DN 150 - About 50 St.
What does SV stand for?
SV stands for Steam Valve
This definition appears very rarely and is found in the following Acronym Finder categories:
- Science, medicine, engineering, etc.
See other definitions of SV
We have 61 other meanings of SV in our Acronym Attic
- Special Volunteer (various organizations)
- Speech Voltmeter
- Speed Value
- Spiritus Vini (Latin: alcoholic Spirit)
- Sport Veloce (Lamborghini model)
- Staff Vacancy (on overtime forms)
- Star Vipers (gaming club)
- Starting Vector
- State Vector (physics)
- Static Vessels (band)
Samples in periodicals archive:
Five features of the system work together to ensure steam regulation is both precise and predictable: special condensate traps, steam filtration, use of step-down regulators, a steam valve and electronic regulation.
The internals of the Element steam valve also exhibit Burkert's new design thinking.
Item number two in the old order book was for a dozen safety valve float rods for a J Hopkinson, of Fitzwilliam Street, who later built his huge factory at Birkby and, as Hopkinsons, became one of the world's leading makers of steam valves and boiler mountings.
By combining Viton with several other ingredients, the company's chemists are said to have developed a compound with properties that are uniquely suited for high temperature steam applications, such as steam trap seals, steam valve seals, and static and dynamic sealing components for various steam applications.
The temperature increase apparent in AHU6 is relatively constant over a period of months (January through April), indicating that the steam valve is likely stuck open or leaking at a constant rate.
For cross steaming, the stationary side steam valve was opened with the stationary drain valve closed.
And how wind power reduces the amount of fossil fuel our power stations burn, when to provide the 100 per cent backup wind requires, even when their steam valves are throttled back to allow wind to take a little of the load, they still have to produce the same amount of steam so they can instantly restore any deficits?