What does SA stand for?

The minimum tests (and equipment) required for a complete green sand control program include: * moisture (sand dryer and balance or digital moisture analyzer); * compactability (sand rammer with base, tube filler accessory and compactability accessory); * density and specimen weight (sand rammer); * permeability (drum or gage-type permmeter); * green compression (strength machine); * green shear (strength machine); * methylene blue (MB) clay (MB clay tester); * AFS or 25 micron clay (autoclay or 25 micron clay washer); * sieve analysis, AFS grain fineness and distribution (sieve set and sieve shaker); * loss on ignition (LOI) (LOI tester consisting of muffle furnace, crucibles, desiccator and crucible tongs); * volatiles (volatiles crucible with lid and tongs).

00 Paperback TP325 A consultant in fossil fuel analysis and quality management based in New Jersey, Nadkarni lists the ASTM methods for measuring such characteristics as carbon and hydrogen in coal and coke, mercury, plasticity of coal, sieve analysis, specific gravity of lump coal, and washability.

White cement bypass dust (WCBPD) Chemical composition and sieve analysis for the WCBPD are shown in Tables 3 and 4, respectively.

A properly designed base must have a good sieve analysis for the stone itself.

Therefore, it is difficult to conduct the sieve analysis as is normally done in the case of cryoground rubber.

which automates sieve analysis of dry granular material helps cut quality control costs.

This way it is possible to achieve near perfect agreement with traditional sieve analysis.

A second run "produced multiple predetermined criteria deviations," including loss on drying, sieve analysis and bulk and tap densities.