These tools are designed specifically to achieve high metal removal rates and so allow users to gain the maximum benefit from the Vortex strategy.
What does MRR stand for?
MRR stands for Metal Removal Rate (machining)
This definition appears very rarely and is found in the following Acronym Finder categories:
- Business, finance, etc.
See other definitions of MRR
We have 134 other meanings of MRR in our Acronym Attic
- Material Removal Rate
- Material Review Report
- Materiel Readiness Report
- Maximum Rock'n'Roll (print zine)
- Mean Reciprocal Rank
- Measurement Residual Ratio
- Mechanical Reliability Report
- Medical Readiness Review
- Medication Regimen Review (pharmaceutical)
- Medium Range Radar
- Microfilm Reduction Ratio
- Milestone Readiness Review
- Minimal Risk Region (USDA)
- Minimum Rediscount Rate
- Minimum Reporting Requirement (various locations)
- Minimum Reserve Requirements
- Minimum Residual Radioactivity
- Minimum Risk Route
- Ministerstwo Rozwoju Regionalnego (Polish: Ministry for Regional Development)
- Minnesota Road Research (Department of Transportation)
Samples in periodicals archive:
The speakers will highlight the benefits of ultra-high pressure coolant delivery on tool life and metal removal rates, specify which applications are most suited to the process and explain how to implement the technology on the shop floor.
While the heat reduction contributes to the increase in overall tool life, the machining approach provides a high metal removal rate compared to conventional practices such that they can realize a speed improvement on the order of 200 to 300% compared with traditional milling.
In turn, this technique allows higher feed rates for improved machine throughput, higher speed for improved metal removal rates, and improved thermal control for better finishing accuracy.
The LM6000's new heavy duty spindle allows metal removal rates of up to 7.
This design enables manufacturing companies to maximise their capital investments, said John R Tucker, vice president and president of the Industrial Business Segment for Kennametal Inc, KM4X enables higher metal removal rates, which facilitates higher machine tool utilisation and reduced cost per part, while increasing the manufacturerA[sup.
These chucks allow milling on five faces for high metal removal rates while eliminating vises and H-clamps for faster part setup, according to the maker.
The 8,000rpm spindle drive system features a 10-hp power rating with 35ft-lb torque rating for optimum metal removal rates.