What does EFS stand for?

Electric Field Strength

This definition appears very rarely and is found in the following Acronym Finder categories:

Science, medicine, engineering, etc.

Other Resources:

<< Previous	Abbreviation Database Surfer		Next >>
Estimated Future Rental Value Kiuruvesi (airport code; Finland) Earth-Fixed System École Française de Spéléologie (French: French School of Speleology) Economic Farm Surplus (farming productivity) Education for Sustainability (various locations) Edwards, Faust, & Smith (Maine accounting firm) Effective Field Size Elastomeric Firestop (construction) Electric Field Stimulation		Electric Field-induced Spectra Electric Funstuff (band & software company) Electrical Feeder System Electronic Filing Service Electronic Filing System Electronic Filing Systems, Inc. Electronic Firing Switch Electronic Form System Éléments Français au Sénégal (French: French Elements in Senegal) Email Forwarding Service (software)

Samples in periodicals archive:

This was followed by pulse treatments for 50 ms and 60 ms at an electric field strength of 40 kV per cm, or for 33 ms at 50 kV per cm.

Hurdle is alternative to HTST processing for liquid foods

[FIGURE 7 OMITTED] [FIGURE 8 OMITTED] A Maxwell SV (Ansoft Corporation) program was used for modeling the electric fields, whereby the electric field strength is inversely proportional to TCD.

Effects of the spin line temperature profile and melt index of ...

63 [micro]m and an electric field strength of 1x[10.

Development of an electroosmotic pump-driven micro LiBr absorption ...

The NEBI was lower at all total treatment times and electric field strengths tested.

Thermosonication and pulsed electric fields offer alternative to heat ...

And finally, the effect of the average electric field strength was studied comparing three arrangements where both distance and voltage were varied.

Exploitation of electric field in controlling of nanofiber spinning ...

37 log10 for electric field strengths ranging from 32 KV to 44 KV per cm.

Temperature, treatment time impact pulsed electric field inactivation ...

The figure shows that the field-interference caused by the T-4 electrode was high near the nozzle, but the electric field strength near the nozzle tip using the T-4 electrode, driving electrostatic force applied in the nozzle tip used to generate nanofibers decreased markedly relative to the T-1 and T-5 electrodes.

An applicable electrospinning process for fabricating a mechanically ...

[10] observed that for every flow rate there is corresponding electric field strength to get a stable jet with other parameters left constant.

Electric current as a control variable in the electrospinning process