What does DFT stand for?

Dry Film Thickness

This definition appears very rarely and is found in the following Acronym Finder categories:

Science, medicine, engineering, etc.

Other Resources:

<< Previous	Abbreviation Database Surfer		Next >>
Discrete Fourier Transform Disk Fault Tolerance Distributed Function Terminal Don't Fault the Teacher Down Flow Tent Draft Draft Tax Forms (IRS) Drafting Drift Drive Fitness Test		DuPont Fabros Technology, Inc. (Washington, DC) Dynamic Fault Tree Distributed Fault-Tolerance/High-Availability Architecture (coding) Dialyzable Fraction of T4 Denver Foothills Tracking Association (Denver, CO) Department for the Aging Deterministic Finite Tree Automaton (computer science) Directional Finding and Tracking Array (Andrea Electronics Corporation; New York) Domestic Fair Trade Association (Boston, MA) Don't Forget to Be Awesome

Samples in periodicals archive:

Additionally, film properties will be affected by dry film thickness, dry time, and coating pigmentation.

Waterborne coatings Direct-to-Metal (DTM) applications

[ILLUSTRATION OMITTED] Once the primer had cured, typically in well under an hour, the membrane was applied in two colour-contrasting coats to provide a minimum dry film thickness of 2mm.

Traffic trial: surfacing a dynamic structure which carries high ...

2]/L) refers to first and second applications combined, as this relates to the dry film thickness of the whole topcoat.

Enhancing exterior performance of clear coatings through ...

During high-volume printing, the printed dry film thickness approaches 1 [micro]m with very tight tolerance.

Organic and printed electronics: the next big thing? New printing ...

Organic or inorganic zinc-rich paints are usually applied to a dry film thickness of 2.

Corrosion protection systems: the performance of zinc-rich paint ...

To answer these questions, films were prepared at a dry film thickness of 5.

Factors that Control the Wet-Property Development of Waterborne Inks

The level of permeability is dictated by both the type and amount of refractory materials that are used in the coating formula and the dry film thickness deposit on the core.

Evaluating refractory coatings: a practical approach

Daystrom applies the clearcoat to the entire solid wood table, including top and base, to a dry film thickness of 4 to 5 mils using conventional low-pressure spray equipment.

Topcoat guards wood tables from household hazards